PanoraView FAQs
The product is manufactured by Libart North America, based in Ohio. Libart North America is a division of Ohio-based Stoett Industries.
Libart North America is the authorized North American distributor for Libart International based in Istanbul, Turkey.
Libart maintains design and manufacturing facilities on 3 continents and has distributors in 25 countries.
Costs can vary based on a few factors. PanoraView projects can be estimated with a known location, the dimensions of the rough opening, and by the operation required. PanoraView can operate as a window system where panels open by moving down and collecting at the bottom of the opening. Or, PanoraView can operate as a door system which moves all panels up to open and collects the panels at the top of the opening.
The first step toward calculating cost is a good faith estimate based on these known factors. It will specify a lower and upper limit to an expected project budget. Then, a Libart Project Manager will will make a site visit when appropriate and work out other details.
Libart created a patented approach for PanoraView. The design goal was to avoid the maintenance-intensive approaches of belts, chains, cables, and counterweights. The result? An innovative screw-drive mechanism.
With this mechanism, PanoraView panels can lock in any position and remain in place with or without power. The user interface features an up/down rocker switch and stop button. One press starts the retraction with an auto-stop at the end of the cycle (fully open or fully closed). You can manually stop the process at any point for ultimate control.